Notice:

All orders placed on or after 11th November 2024 will be dispatched on 21st November 2024 due to unavailability of our team. Kindly order accordingly.

 
-15%

VNH2SP30 Dual Motor Driver Shield 2x14A (Peak 30A)

Motor Driver Specification:

  1. Voltage : 12V-16V DC
  2. Peak Current : 14A
  3. Continuous Current : 30A
  4. LED Indicator : Yes
  5. No. of Channels : 2
  6. Mosfet on Resistance : 19mΩ (per leg)
  7. Frequency : 20 kHz

1,652.54 GST Excluding

SKU: SRK-001126Categories: Motor Driver

Out of stock

Additional Information

The VNH2SP30 Dual Motor Driver Shield 2x14A (Peak 30A) is essentially a ramped-up version of our Ardumoto motor driver shield. It is replaced the L298 H-bridge with a pair of VNH3ASP30 full-bridge motor drivers.

It is also beefed up the support circuitry so this board is capable of driving a pair of high-current motors! The VIN and motor out are pitched for our 5mm screw terminals (not included), making it easy to connect larger gauge wires.

The L298 H-bridge is no longer available in the Motor Driver Shield Monster Moto since it has been replaced for a pair of VNH2SP30 full-bridge motor drivers. The Motor Driver Shield Monster Moto has been enhanced to drive a pair of high-current motors while the VIN and motor have been adjusted for connecting larger wires more easily.

VNH3ASP30 is a full-bridge motor driver intended for a wide range of automotive applications. The device incorporates a dual monolithic high side driver and two low side switches.

The high side driver switch is designed using the STMicroelectronics well-known and proven proprietary VIPower M0 technology which permits efficient integration on the same die of a true Power MOSFET with an intelligent signal/protection circuitry. The VIN and motor out are pitched for 5mm screw terminals, making it easy to connect larger gauge wires. INA and INB control the direction of each motor, and the PWM pins turn the motors on or off.

For the VNH3ASP30, the current sense (CS) pins will output approximately 0.13 volts per amp of output current.

Note:

When using this board in extreme high-demand applications it may be necessary to improve thermal performance with a heat-sink or fan and to solder the wires directly to the board instead of using a screw terminal (in addition to the myriad other complications present in a high-current system) However, when using the board at currents up to 6A the chips will barely become noticeably warm.
VNH3ASP30 is the updated version of VNH2SP30.


Package Includes :

1 x VNH2SP30 Dual Motor Driver Shield 2x14A (Peak 30A)

Related product

Dual Monster Motor Driver Shield VNH3ASP30 Module 2x14A (Peak 30A)-srkelectronics.in
-15%

Out of stock

L298N Motor Driver ic-srkelectronics.in
-15%

L298N Motor Driver ic

101.69 GST Excluding

L293D Motor Driver ic-srkelectronics.in
-15%

L293D Motor Driver ic

42.37 GST Excluding

Irf520 Mosfet Driver Module-srkelectronics.in
-15%

IRF520 Mosfet Driver Module

127.12 GST Excluding

Shop Location

Shop Location

81/5, 8th Main Road
Devaraj Urs Nagar
Bengaluru
Karnataka: 560026

Shipping with

Blue Dartdtdctpcindia
Important Notices

Notices

Delivery in Bangalore in One Business Day for order placed before 10:00 AM**
Delivery time PAN India : 2-5 days**.

Subscribe

Subscribe