support@srkelectronics.in

Login / Register

L9110S Motor Driver Module-srkelectronics.in

-16%

L9110S DC Stepper Motor Driver Module

L9110S-chip motor drive
Supply voltage : 2.5-12V
The maximum operating current of 0.8A
Drive two DC motors or a 4-wire 2-phase stepping motor
Ultra-small size, suitable for assembly

Original price was: ₹100.00.Current price is: ₹84.00. GST Excluding

SKU: SRK-0035Categories: Speed Controller Motor Driver

Select Below Products To Add Together

Female To Female Jumper Wire 20CM 1Strip 40~Pieces

Original price was: ₹70.00.Current price is: ₹59.32. GST Excluding

+

Male To Female Jumper Wire 20CM 1Strip 40~Pieces

Original price was: ₹70.00.Current price is: ₹59.32. GST Excluding

+

Additional Information

Description

The L9110S DC Stepper Motor Driver Module is a compact board that can be used to drive very small robots.

This tiny module has two independent L9110S motor driver chips which can each drive up to 800mA of continuous current. The boards can be operated from 2.5V to 12V enabling this module to be used with both 3.3V and 5V microcontrollers.

A set of male header pins is used to connect this module to your robot’s microcontroller brain. The motors are attached via two sets of screw terminals. A PWM Pulse Width Modulation signal is used to control the speed of a motor and a digital output is used to change its direction. This module can also be used to drive a single four-line two-phase stepper motor. Four holes make this board easy to mount onto your robot or another project.

Modules Interfaces:

6P black bent pin description:

1 VCC external voltage 2.5V-12V

2 GND External GND

3 AIA external microcontroller IO port

4 AIB external microcontroller IO port

5 BIA external microcontroller IO port

6 BIB external microcontroller IO port

4P green terminal:

1 OA1 OB1 contact DC 2-pin, non-directional

2 OA2 OB2 contact DC 2-pin, non-directional

Dual H Bridge Motor Driver Module-srkelectronics.in

Use:

ON VCC, GND module power indicator light

AIA input high, AIB input low, [OA1 OB1] motor is transferred;

AIA input low, AIB input high, [OA1 OB1] motor reversal;

BIA input high, BIB input low,] [OA2 OB2 motor is transferred;

BIA input low, BIB input high,] [OA2 OB2 motor reversal.

Package Includes:

1 x L9110S DC Stepper Motor Driver Module

Related product

PWM 1.8V 12V 2A DC Motor Speed Controller Module-srkelectronics.in

-15%

Speed Controller Motor Driver

PWM 1.8V 12V 2A DC Motor Speed Controller Module

Original price was: ₹118.00.Current price is: ₹100.00. GST Excluding

1203B PWM 6V 12V 24V 28V 3A DC Motor Speed Controller Module-srkelectronics.in.png

-15%

Speed Controller Motor Driver

1203B PWM 6V 12V 24V 28V 3A DC Motor Speed Controller Module

Original price was: ₹142.00.Current price is: ₹120.00. GST Excluding

VNH2SP30 Monster Motor Driver Module 14A (Peak 30A)-srkelectronics.in

-15%

Out of stock

Speed Controller Motor Driver

VNH2SP30 Motor Driver Module 14A (Peak 30A)

Original price was: ₹500.00.Current price is: ₹423.73. GST Excluding

Dual Monster Motor Driver Shield VNH3ASP30 Module 2x14A (Peak 30A)-srkelectronics.in

-15%

Out of stock

Speed Controller Motor Driver

VNH2SP30 Dual Motor Driver Shield 2x14A (Peak 30A)

Original price was: ₹1,950.00.Current price is: ₹1,652.54. GST Excluding

©2026 SRK ELECTRONICS